Rack-Mount Setup - Powerware 9125 User Manual

Installation

Rack-Mount Setup

The UPS can be installed in 19-inch racks and needs only 2U of valuable
rack space.
The UPS and Extended Battery Module are heavy (see page 65). A minimum of two
people are required to lift the UPS into the rack.
NOTE Mounting rails are required for each UPS and EBM cabinet. If rails are not
already installed in your rack, contact your local distributor to order a rail kit.
Use the following procedure to install the UPS in a rack:
1. Place the UPS on a flat, stable surface with the front of the UPS
2. Attach the mounting handles to the bracket with the screws
3. Align the mounting brackets with the screw holes on the side of
4. If installing optional EBMs, repeat Steps 1 through 3 for each
22
C A U T I O N
facing toward you.
provided in the accessory kit (see Figure 2).
the UPS and secure with the supplied screws (see Figure 2).
cabinet.
Mounting
Handle
Figure 2. Installing the Mounting Brackets
Powerware 9125 User's Guide (2500–3000 VA)
®
Mounting
Bracket
:
Rev B www.powerware.com