Remove Belt - Maytag MDE17CS Service Manual

rEMOvE BElT

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the dryer front panel
(See page 4-25).
2. Reach in under the drum and lift the idler
assembly to ease the pressure on the belt.
3. Release the belt from the idler arm and the
motor pulley.
Motor Pulley
4. Remove the belt from the dryer.
NOTE: The belt is a five rib belt and not
interchangeable with the household four rib
belt. When reassembling the dryer, make
sure the ribs of the belt are riding in the
motor pulley grooves.
Idler Pulley
4-31