Open Control Panel - Mn; Remove Indicator Light - Mn/Cs - Maytag MDE17CS Service Manual

OPEN CONTrOl
PaNEl - MN
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the two top T-20 security screws
on the control panel.
Two T-20
Security Screws
2. To avoid damage, lay a towel, or another
covering, on the dryer top and place the
control panel, as well as removed hardware
and tools, on the covering.
rEMOvE iNDiCaTOr
liGHT - MN/CS
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Open the control panel (See left column).
2. Slide the indicator light off the indicator lens
on the back side of the control panel. The
indicator lens will slide out of the control
panel when it is picked up.
3. Disconnect two wire connectors to remove
the indicator light.
4-13
Indicator
Light