Component Access; Open Control Panel - Cs; Remove Facia - Cs - Maytag MDE17CS Service Manual

OPEN CONTrOl
PaNEl - CS
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the top two T-20 security screws
on the control panel.
Security Screws
2. To avoid damage, lay a towel, or another
covering, on the dryer top and place the
control panel, as well as removed hardware
and tools, on the covering.

COMPONENT aCCESS

Two T-20

rEMOvE FaCia - CS

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Open the control panel. (See left column)
2. Remove the remaining two T-20 security
screws from the front of the facia.
3. Slide the indicator light off the indicator lens
on the back side of the control panel. Use
care as the indicator lens will fall out of the
control panel when it is picked up.
4. Pull the facia away from the front of the
control panel.
4-1
Two T-20
Security Screws
Indicator
Light