Remove Gas Valve Coils - Maytag MDE17CS Service Manual

rEMOvE GaS valvE COilS

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the lower service panel
(See page 4-21).
2. Remove the two star head screws that
secure the bracket.
Two Star
Head Screws
3. Lift the bracket off the coils.
4. Lift the coils off the posts and disconnect
the wire connector from each coil.
NOTE: Make sure the sleeve remains
on the post when the 3 terminal coil is
removed.
NOTE: Over time different gas valve
manufacturers may be used and the coil
removal may differ slightly.
4-41