Removing The Belt, Drum, & Rear Rollers - Maytag MED5800TW - Electric Dryer Technical Education

REMOVING THE BELT, DRUM, & REAR ROLLERS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Remove the cabinet front from the dryer
(see pages 4-5 and 4-6 for the proce-
dure).
4. To remove the belt and drum:
a) Reach under the drum to the drive mo-
tor and push the idler wheel arm to
relieve the spring tension on the belt,
then slide the belt off the motor pulley.
b) Remove the idler pulley assembly from
the dryer.
Belt
Idler Pulley
5.
Left Roller
Remove Belt
From Pulley
4-8
c) Lift the drum and remove it with the
belt from the dryer.
Remove Drum & Belt
To remove the rear rollers:
Right Roller