Omron SYSMAC CS Series Operation Manual page 191

Exchanging Data Using SCADA and Other Software
Procedure
Imported
Faceplate
Auto-Builder for NS
NS Project
file (.ipp:
Binary)
NS-series
PT
Using Faceplate Auto-Builder for NS
1,2,3...
CX-Process Tool
CSV tag file output
(Execute - Create Tag File -
CSV Tag or Execute - Create
Tag File - Start NSFP)
CSV tag file
for SCADA
Software
(Taglist.csv)
Imported
SYSMAC OPC
Server
Manually export
Tag file for
RS View
(***.csv)
Imported using
import utility
1. Start the Faceplate Auto-Builder for NS.
2. Set the CSV tag file from which the project will be built (CSV tag file for
SCADA Software), the project name, and output folder.
3. Set the NS-Series PT settings in the PT Model, Comm. Type, and Screen
No. Offset and other fields under the Build Condition heading.
4. Click the Build Button.
5. The NS-Designer project file for the specified file name will be automatical-
ly built in the specified output folder.
6. Use NS-Designer to read the automatically built project files.
7. Use NS-Designer to edit the project files as required.
8. Set the initial settings for communications between the NS-series PT and
PLC in the NS-Designer System Settings.
9. Transfer the settings from NS-Designer to the NS-series PT (or save the
settings to a Memory Card, and then install the Memory Card in the NS-
series PT.
Tag file output for RS View
(Execute - Create Tag File -
RS View Tag)
CSV tag file
for SCADA
Software
(Taglist.csv)
Automatically generated
SYSMAC OPC
Server Ver. 2.4
OPC Tag
or higher
Settings File
(.sbd, binary)
Automatically generated
Tag file for
RS View
(***.csv)
Imported using
import utility
RS View32
Section 3-4
159