Simple Backup Of Function Block Data To A Memory Card (Lcb01/03/05 Ver. 3.0 Or Later) - Omron SYSMAC CS Series Operation Manual

Description of Operation
Online operation from CX-Process
Tool
Operation Cold start
commands
Hot start
Stop
System operation validation
Action validation
All clear
Tuning
Password protection
Version check
Backup/ Backup
recovery (transfer to
flash mem-
ory in Loop
Controller)
Recovery (transfer from
flash memory to RAM in
Loop Controller)
3-2-6 Simple Backup of Function Block Data to a Memory Card
(LCB01/03/05 Ver. 3.0 or Later)
Outline
110
During
simple
backup
operation
Possible, but
backup may
not be normal
Possible
Possible
Possible
Possible
Possible, but
backup may
not be normal
Possible
Possible
Possible
While Possible
transfer-
ring
While Not possible
stopped
Possible, but
backup may
not be normal
With LCB01/03/05 Ver. 3.0 or later, the following data (in addition to all data in
the CPU Unit) can be simultaneously and automatically backed up, restored,
or compared using the Memory Card for the Loop Controller RAM using the
simple backup operation.
• Function block data (See note 1.)
• Tag and comment data (block diagram information, tags, comments, and
annotations)
Results on CX- Backup
Process Tool continued/
when operation interrupted
is not possible
--- Possible
---
---
--- Possible
--- Possible
--- Possible
--- Possible
---
Possible
---
Possible
--- Possible
MCPWR indica- Not possi-
ble
tor flashes on
CPU Unit and
simple backup
operation ends in
an error.
--- Possible
Section 3-2
Data in Memory Card resulting
from simple backup operation
The data backed up in the Mem-
ory Card may not be correct. If
the data is not correct, a function
block database error (RAM) will
occur and A42410 will turn ON
when recovery is attempted.
Simple backup operation ends
normally.
Simple backup operation ends
normally.
Simple backup operation ends
normally.
Simple backup operation ends
normally.
The data backed up in the Mem-
ory Card may not be correct. If
the data is not correct, a function
block database error (RAM) will
occur and A42410 will turn ON
when recovery is attempted.
Simple backup operation ends
normally.
The simple backup operation will
be cancelled if password protec-
tion is set.
Simple backup operation ends
normally.
Simple backup operation ends
normally.
Simple backup operation will not
be possible.
The data backed up in the Mem-
ory Card may not be correct. If
the data is not correct, a function
block database error (RAM) will
occur and A42410 will turn ON
when recovery is attempted.