Table of Contents
Advertisement
P/N 9FQ6P11007900_B
IN CASE OF THE FOLLOWING:
LED Lamp does not work:
Contact your Hussmann representative to
replace LED lamp fixtures . Fixtures must be
replaced with like fixtures .
When not using the merchandiser for a long
period of time:
Remove all items from the merchandiser, and
the power plug from the power socket . Clean
the inside of the cabinet, and wipe away any
moisture . Make sure not to store the unused
case in a place where children can play .
Damage to the power cord or plug:
If the cord is damaged, unplug the cord, and
contact your Hussmann representative for
replacement . Do not allow the wheels of the
merchandiser to rest on the cord .
Water on the floor:
If there is water around the merchandiser, check
overflow drain pan underneath the case, and
dispose of any accumulated water or dirt in the
pan . Wicking plates may need replacement .
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electrical
shock, always disconnect the electrical power
at the main disconnect when servicing or
replacing any electrical component. This
includes, but is not limited to, such items as
doors, lights, fans, heaters, and thermostats.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
SERVICE
When moving the case a long distance:
Use a trolley . Caution must be observed when
moving the case to prevent it from toppling over
if it is tilted more than necessary .
LED POWER SUPPLY LOCATION
The LED driver delivers DC power to the LED
Lamp . The power supply is located behind
the panel on the righthand side of the case . If
it is determined that the power supply is not
working and needs to be replaced, replace it
with like components . Failure to place with a
similar rated power supply will cause the LED
lamp to be damaged or not work properly .
Product will be degraded and may spoil if
allowed to sit in a non-refrigerated area.
LED Driver
(Power Supply)
Open Vertical Merchandisers
4-1
Advertisement
Table of Contents
