Table of Contents
Advertisement
5-2
SERVICE
REPLACING LIGHTS
This section is only valid if the Optional Light
Bar is ordered — field installed only.
There is a convenient ON/OFF switch located
on the light bar. This switch only controls the
lights. ALWAYS disconnect electrical power
when replacing lights or lighting parts.
SHM merchandisers are available with option-
al LED lights. The bulb is sleeved to protect
the lights from damage. If these bulbs need to
be replaced, slide the prongs clear of the lamp
holder. Ensure that the prongs on the replace-
ment bulb twist and lock into place.
REPLACING BALLAST / POWER SUPPLY
LED fixture replacement follows the same
steps as fluorescent bulbs. However, LED
fixtures have the sleeve built in as a single
assembly. The LED power supply is located in
the electrical box of the light bar kit.
P/N 0515258_N
Fluorescent lamps contain mercury vapor.
Mercury exposure at high levels can harm
the brain, heart, kidneys, lungs, and
immune system of people of all ages. Do
not break or puncture fluorescent lamps.
Dispose of, or store, all fluorescent lamps
in accordance with Federal (40 CFR 273),
State, and local hazardous waste require-
ments. Refer to:
http://www.epa.gov/mercury/about.htm
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com
Hide quick links:
Advertisement
Table of Contents
