Appendix 1 Specifications - Denso GT10Q-SB User Manual

Appendix 1 Specifications

Scanning specifications
Interface
Input power requirements
Operating time per charge
Environmental conditions
Dimensions (W) x (D) x (H)
Weight
( ) Sharp temperature change, dewing or freezing not allowed, wet-bulb temperature 30C max.
1
*
Item
Readable codes
Skew angle
Scanning resolution
Elevation angle (skew)
Tilt angle (pitch)
Light source
Reading confirmation
®
Bluetooth
Main power
Operating voltage
Operating temperature
range
Operating humidity range
Storage temperature range
Storage humidity range
Ambient illuminance range
QR Code (Model 1 and Model 2), MicroQR, SQRC,
PDF417, MicroPDF, MaxiCode, Data Matrix, and
EAN.UCC Composite symbol
EAN-13/8, UPC-A/E, UPC/EAN with add-on, Interleaved
2of5 (ITF), Code 39, Codabar (NW-7), Code 128, EAN-128,
and RSS
360º
0.25 mm (9.8 mils) min. for two-dimensional codes
0.15 mm (5.9 mils) min. for bar codes
35
35
LED (red)
Blue LED, beeper and vibrator
Built-in wireless module compliant with Bluetooth
Specification Ver. 1.1
Ni-MH battery cartridge
24 VDC
8 hours (when scanning once per 5 seconds)
0 to 50C
( )
1
10 to 90% RH *
-10 to 60C
( )
1
5 to 95 %RH *
Max. 10,000 lux
3.2 x 4.1 x 6.5 inches (82 x 103 x 165 mm)
Approx. 260 g (including a battery cartridge)
82
GT10Q-SB
®