Table of Contents
Advertisement
Scanner as Master
To configure the scanner as a master and the communications adapter (or some other Bluetooth
follow the sample procedures given below and specify the slave's Bluetooth
ratio of the scanner and slave device should be 1:1.
Using the communications adapter (example)
(1) Use the scanner to read the bar code (communications adapter's Bluetooth
communications adapter.
(2) Wait for the scanner to configure itself as a master and establish a Bluetooth
communications adapter.
(3) Wait for the scanner to beep twice and the indicator LED to turn green (for 0.5 second).
Using some other Bluetooth
(1) Confirm the device's Bluetooth
For the instructions on how to confirm, see the user's manual.
(2) With the configuration software (ScannerSetting_2D)*, generate a "Bluetooth
equipment's Bluetooth
When using a commercially available code generator, generate it in the following format.
QR Code Model 1, 2
Code 128 Code Set A
(Note) XXXXXXXXXXXX should be a Bluetooth
Example: Bluetooth
(3) Use the scanner to read the "Bluetooth
(4) Wait for the scanner as a master to establish a Bluetooth
(5) Wait for the scanner to beep twice and the indicator LED to turn green (for 0.5 second), indicating a successful
connection.
Note: The scanner does not check the
set up that it asks for the Bluetooth
device, using the procedures set forth in the user's manual.
* The configuration software (ScannerSetting_2D) is available as free downloads from our website at
http://www.denso-wave.com/.
device (example)
address.
address to the scanner.
Code type
%% ADDRXXXXXXXXXXXX %%
ADDRXXXXXXXXXXXX
address 000AF1234567
ADDR000AF1234567
address" code.
Bluetooth
passkey, therefore, modify the slave's setting to unconditionally connect to the master
Data format
address in hexadecimal.
wireless link with the specified Bluetooth
passkey when connecting to the slave device. If the slave device is so
4
equipment) as a slave,
address to the scanner. The connection
address) on the back of the
wireless link with the
address" code that specifies the
device.
Advertisement
Table of Contents
