Table of Contents
Advertisement
(5) Number of digits
This optional field specifies whether or not to transmit the number of digits (4 bytes) in code data or disables the
transmission (default). Note that UPC and EAN codes (except EAN-128) skip this field.
n1 : thousands (0 to 9)
n2 : hundreds (0 to 9)
n3 : tens (0 to 9)
n4 : units (0 to 9)
(6) Code data
The data format for each symbology is described below.
QR Code/MicroQR Code
Code data read will be transmitted as is.
Split QR Code
In edit mode and batch edit mode: The scanner edits code data read and then transmits it. It does not transmit the code
number, number of splits, or parity.
In non-edit mode: The scanner transmits the code number, the number of splits, parity, and code data read. The code
number and the number of splits are 1 byte each and the parity, 2 bytes in hexadecimal format.
SQRC
The data content is transmitted.
If the scanner is set to transmit only the undisclosed data in the encryption key match setting, transmission is limited to
undisclosed data only and no other data is transferred.
X
X
X
X
X
Y
Y
Y
1
2
3
4
5
1
2
X
：Disclosed data
n
Y
：Undisclosed data
m
Transmission of disclosed data + undisclosed data
X
X
X
X
X
Y
Y
Y
1
2
3
4
5
1
2
Transmission of undisclosed data only
Y
Y
Y
Y
Y
1
2
3
4
5
PDF417, MicroPDF, MaxiCode and Data Matrix
Code data read will be transmitted as is.
UPC-A
0 S X
X
X
X
X
X
1
2
3
4
5
6
S: Number system character
You can select whether or not to transmit a check digit.
Y
Y
3
4
5
Y
Y
3
4
5
X
X
X
X
C/D
7
8
9
10
45
Advertisement
Table of Contents
