Table of Contents
Advertisement
(2) Bluetooth
communications parameters
Items
Communications protocol
Header
Terminator
Configure the scanner as master or slave
Connection target of scanner as master
Specification of connection target's address
(only when local name is specified)
Timeout period for slave to wait for a
connection request
Timeout period for automatic disconnection
of the Bluetooth
wireless link
Bluetooth
interface
(Note 1) The factory default is "End operation."
Parameters
Non-acknowledge mode
ACK/NAK mode
None
STX
ETX
CR
LF
CR LF
As a master
As a slave
No slave/master configuration change
Bluetooth
address
Local name
Communications adapter
(BA10-RKU)
Connection target's address
2 minutes
4 minutes
10 minutes
30 minutes
5 to 640 minutes
Disable automatic disconnection
Start operation
End operation
: Changeable only with the QR-coded parameter menu.
: Changeable only with the configuration software.
55
Defaults
Refer to:
Section 9.1 (1)
Section 9.2 (1)
Section 2.2
Section 2.2
None
Section 2.2
Section 9.1 (2)
60 min.
Section 9.1 (3)
Section 2.1
(See Note 1.)
Advertisement
Table of Contents
