13.2 QR-Coded Parameter Menu for Scanners
Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults)
Start setting
All defaults
The beeper volume can be set by scanning the following QR Code symbol only. No "Start setting" or "End
setting" QR Code symbol is required to scan. Note that the "Start operation" of the Bluetooth
parameter should be selected.
Adjusting the beeper volume
Scanning this QR Code symbol cycles the beeper volume through High, Medium and Low. The factory default is
High.
Cancel
Beeper volume
66
Start setting
(When the "White code on
black background" is set)
End setting
interface