Extracting Data Blocks - Denso GT10Q-SB User Manual

2d code handy scanner

Table of Contents

7.2.1.2 Extracting data blocks

If data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block

numbers from a code specified by the "Code type" and then outputs it in the data transmission format selected in the

scanner (see Chapter 9, Section 9.2). The extraction conditions and data bock numbers are listed below.

 Extraction conditions

Extraction conditions

"Code type"

"Data transfer regardless of error result"

If the scanner fails to extract a data block or scans a code not specified by "Code type" when the "Data transfer

regardless of error result" is permitted, then it outputs the data read as is without editing.

 Data block numbers

Each data block number should be within the range from 1 through 99. Up to three blocks can be extracted.

Choices

Any code

QR Code

PDF

Data Matrix

MaxiCode

UPC-A/EAN-13

UPC-E

EAN-8

Code 128

EAN-128

Codabar (NW-7)

Code 39

Interleaved 2of5 (ITF)

RSS

EAN.UCC Composite symbology

Permit/Prohibit

Table of Contents