Table of Contents
Advertisement
Chapter 14 QR-Coded Parameter Menu for Communications Adapters (BA10-RKU)
14.1 Customizing the Communications Adapter from the Scanner
The scanner can customize the communications adapter by scanning the QR-coded parameter menu for
communications adapters and transferring their settings held in the scanner memory via the Bluetooth
using the following procedure.
Scanner
Store the communications
adapter parameter settings
in the scanner memory.
Communications adapter
Power the
communications adapter.
Communications adapter
Switch to the setup mode.
Communications adapter
(The communications adapter, as a slave, is waiting for a master to connect.)
Scanner
Establish the Bluetooth
wireless link.
Scanner's indicator LED: Flashes in blue
(The scanner beeps three times and initiates a Bluetooth
Scanner
Communications adapter
Transfer the
communications adapter
parameter settings.
Scanner
Communications adapter
Use the scanner to scan the QR-coded parameter menu designed for communications
adapters (Section 14.2) to store their parameter settings into the scanner memory.
Tip: Using the configuration software (ScannerSetting_2D) designed for scanners
also allows parameter settings for communications adapters. It, however, requires
connecting the adapter via a USB-COM or RS-232C interface to the host computer.
For details, refer to the "Communications Adapter User's Manual."
Power the communications adapter.
Note: Any type of interfaces that power the communications adapter can be used,
regardless of the interface setting made in the adapter. For the interfacing procedure,
refer to the "Communications Adapter User's Manual," Chapter 2.
Hold down the SETUP button provided on the bottom of the communications adapter
for at least 0.5 second with a pin or the like to switch to the setup mode.
Note: Leaving the communications adapter for 3 minutes or more after depression of
the SETUP button automatically exits the setup mode.
Interface/power supply LED: Flashes in orange
Bluetooth
Use the scanner holding communications adapter parameter settings to scan the bar
code printed on the bottom of the communications adapter.
After establishment of the Bluetooth
communications adapter about the current status and transfers the communications
adapter parameter settings stored in the memory.
Note: If the scanner cannot receive an acknowledge response from the
communications adapter, it cancels the parameter setting sequence. Both the scanner
and communications adapter automatically return to standby for initiation of a
Bluetooth
wireless link.
Indicator LED: Lights in green
Bluetooth
status display LED (blue): Flashes slowly
wireless link, as a master.)
wireless link, the scanner inquires of the
status display LED (blue): Flashes rapidly
75
wireless link
Advertisement
Table of Contents
