Table of Contents
Advertisement
7.1.3 Verification result output
(1) Report of match/mismatch status
You can select any of the following report types using the configuration software (ScannerSetting_2D). Selecting
"Disable transmission" reports nothing.
Setting
1
Disable transmission.
2
Enable code data transmission.
3
Enable code data transmission.
4
Enable OK transmission.
(2) Beeper, indicator LED and vibrator
You can check whether the verification result is a match or mismatch with the beeper, indicator LED and vibrator.
When the beeper, indicator LED and vibrator are enabled, they act as listed below.
If there is a match:
If there is a mismatch:
(3) Scan lock
The scan lock function locks the scanner on standby if the verification result is a mismatch. You can enable or disable
this function with the configuration software (ScannerSetting_2D).
Once the scanner is locked, it switches to standby regardless of the current trigger switch control selected. The scanner
remains on standby even if the trigger switch is pressed or a ready-to-scan command (R, READON or LON) is
received.
Pressing the magic key releases the scan lock.
Note: In the data verification mode, the magic key is used to enter a master bar code, not used to break the Bluetooth
wireless link. To break the link, scan the "Break Bluetooth
as a master, is searching for a connection target or it is, as a slave, waiting for a master to connect, the magic key can
break the Bluetooth
wireless link. See Section 2.3 for details.
Note: In any of the following cases, the scan lock is disabled regardless of the current setting.
- When the "End operation" parameter is selected
- When the Bluetooth
selected
Note: Breaking and connecting the Bluetooth
data stored releases the scan lock.
If there is a match:
Beeper
Emits a short beep.
Emits a long beep.
wireless link is broken, except when the "Scan w/ Bluetooth
If there is a mismatch:
Disable transmission.
Disable transmission.
Enable NG transmission.
Enable NG transmission.
Indicator LED
Lights in blue.
Lights in red.
wireless link" QR Code symbol. Note that when the scanner,
wireless link does not release the scan lock. Clearing the master bar code
17
Vibrator
"OK" vibrations
"NG" vibrations
Operates.
--
Operates.
wireless link broken" parameter is
--
Advertisement
Table of Contents
