Denso GT10Q-SB User Manual page 72

Interleaved 2of5
Items
Scanning Interleaved 2of5
Min. number of digits to scan
for Interleaved 2of5
Max. number of digits to scan
for Interleaved 2of5
Codabar (NW-7)
Items
Scanning Codabar (NW-7)
Min. number of digits to scan
for Codabar (NW-7)
Max. number of digits to scan
for Codabar (NW-7)
Transmission of start/stop codes
for Codabar (NW-7)
Code 39
Item
Scanning Code 39
Min. number of digits to scan
for Code 39
Max. number of digits to scan
for Code 39
Transmission of start/stop codes for Code 39
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
2 to 99 digits
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
3 to 99 digits
(including start/stop codes)
Enable
Disable
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
1 to 99 digits
(excluding start/stop codes)
Enable
Disable
: Changeable only with the configuration software.
59
Defaults Refer to:

Section 13.2
4 digits
(See Note 1.)
99 digits
Defaults Refer to:

Section 13.2
4 digits
(See Note 1.)
99 digits

Section 13.2
Defaults Refer to:

Section 13.2
1 digit
(See Note 1.)
99 digits
Section 13.2
