Table of Contents
Advertisement
Updating Firmware Using Firmware Loader
To use Firmware Loader to upload a new firmware file to your unit:
1.
Open the Firmware Loader via your desktop
selections:
Start
2.
The
Firmware Loader
front of it.
3.
From the
4.
Click
Connect
green in the
Figure 31.
5.
Click
Add
SW4 12G HD-SDI information is added to the
dialog box.
6.
Double click on
>
>
All Programs
Extron Electronics
window opens, with the
drop-down menu (see figure 31,
Device Name
(
). If the connection is successful,
2
panel (
Connected Device
Successful Connection to SW4 12G HD-SDI via Firmware Loader
(
) at the bottom of the dialog box. The
4
<double click to set>
menu by making the following
Start
>
>
Firmware Loader
dialog box displayed in
Add Device
), select
1
SW4 12G HD-SDI
).
3
window closes, and the
Add Device
panel of the
Device
in the
New Firmware File
SW4 12G HD-SDI • Reference Information
Firmware Loader
.
SW4 12G HD-SDI
√ is displayed in
Firmware Loader
column.
34
Advertisement
Table of Contents
