Table of Contents
Advertisement
Device Name — Select the
•
name of the connected SW4 12G HD-SDI switcher.
Figure 15.
Device Name Screen
To edit the device name, click in the
•
new name (only letters, numbers, and the hyphen (-) can be used in this field).
When finished, click
To reset the device name to its factory default (SW4-12G-HD-SDI) click
•
(
).
Default
3
•
Click
to close the window without making any changes.
Cancel
Selecting the reclocker rate
To set the reclocker rate, select the desired rate from the drop-down menu. The default is
.
Other
Figure 16.
Reclocker Rate Menu
tab (see figure 15,
Device Name
Enter a Device Name
(
).
Apply
4
SW4 12G HD-SDI • Software Configuration and Control
) to view and edit the
1
field (
) and type the
2
Reset to
25
Advertisement
Table of Contents
