Table of Contents
Advertisement
7.
In the
Choose Firmware File
(see figure 32,
), and click
1
NOTES:
When downloaded from the Extron website, by default the firmware is placed at
•
C:\Program Files (x86)\Extron\Firmware\SW
•
The firmware file must have a .s19 extension. Attempting to upload a file with a
different extension could cause the device to stop functioning.
Figure 32.
Choose Firmware File Window
8.
In the
Firmware Loader
Figure 33.
Firmware Upload in Progress
The following indicators show the progress of the update:
•
The
Transfer Time
the update (
).
2
•
The
Total Progress
In the
panel (
•
Devices
percentage and another progress bar. The
9.
The upload is complete when the
column shows
Progress
and in the
column. Close the
Status
window, browse to locate the new firmware file, select it
(
).
Open
2
dialog box, click
(see figure 33,
Begin
panel shows the amounts of remaining and elapsed time for
panel (
) displays a progress bar with
3
), the
column displays an incrementing
4
Progress
Status
panel shows
Remaining Time
, and
is displayed above the progress bar
100%
Completed
Firmware Loader
SW4 12G HD-SDI • Reference Information
4
.
12G HD-SDI
).
1
above it.
Uploading
column displays
Uploading
, the
00.00.00
dialog box.
.
35
Advertisement
Table of Contents
