Table of Contents
Advertisement
AV Controls panel — In this panel you can select (switch) an input, and mute and
3
unmute the audio and video signal. To collapse and hide this panel, click the arrow
button in the upper-right corner of the panel.
For a description of the components of this panel, see
General Settings panel — This panel contains a
4
you can click to view information about your SW4 12G HD-SDI unit and to change its
device name. It also contains the controls that enable you to select the reclocker rate,
lock or unlock the front panel, and enable and set priorities for auto-input switching.
PCS menu icon — Click this icon to display the PCS menu, from which you can open
5
the general PCS help file, open the PCS introductory tutorial, expand or collapse the
text on the device tabs to display or hide the device IP addresses (TCP/IP connection
only), enable and disable certain dialog boxes that appear in response to actions, check
the software version number, and exit the PCS program (see
page for a description of these items).
Menus
The main window contains two drop-down menus: the
You can access these menus by clicking the appropriate icons.
Device menu
To display the
switcher, click the down arrow on its device tab. The
menu contains the following items:
•
Disconnect
computer. You can still click the configuration buttons
to display the pages, but all interactive fields are
disabled.
•
Settings
Settings
including the part number, model name, model description, and firmware version. You
can also edit the device name (see
page 24 for details).
•
Reset Device
reset to factory defaults (see
•
Update Firmware
which you can select to upload a new firmware version to the switcher (see
Firmware using PCS
•
About This Module
dialog box shown at right, which
displays the part number and
version of the switcher module of
PCS.
drop-down menu for your
Device
— Disconnects the switcher from the
— Displays the
Hardware Settings
dialog box. This screen enables you to view information about the unit,
Viewing and configuring hardware settings
— Opens a
Reset Device
Resetting the Unit
— Displays the
Update Firmware to this Device
on page 27 for the procedure).
— Opens the
SW4 12G HD-SDI • Software Configuration and Control
AV Controls
on page 23.
Hardware Settings
PCS menu
menu and the
Device
submenu, which opens the
screen on which you can initiate a switcher
on page 26 for more information).
button, which
on the next
menu.
PCS
Hardware
on
submenu, from
Updating
21
Advertisement
Table of Contents
