Table of Contents
Advertisement
3.
In the
Firmware Files
.
Open
NOTE: Only valid SW4 12G HD-SDI firmware files with an .s19 extension are
accepted.
Figure 26.
Firmware Files Window
4.
The
window closes and the path to the selected firmware file appears
Firmware File
in the
Update Firmware to this Device
Figure 27.
Update Button
5.
Click
(
). The
Update
2
bar showing the percent of the upload completed.
6.
When the firmware update is complete, the SW4 12G HD-SDI main window closes and
following window appears in front of the
the prompt.
Figure 28.
Update Successful Window
7.
The next prompt tells you to reconnect with the SW4 12G HD-SDI using the
window. Click
Discovery
window, locate and select the desired firmware file, and click
window (see figure 27,
Update Firmware to this Device
Device Discovery
on this prompt and reconnect PCS to the switcher.
Close
SW4 12G HD-SDI • Software Configuration and Control
).
1
window displays a progress
window. Click
on
Close
Device
30
Advertisement
Table of Contents
