Table of Contents
Advertisement
Command
Unit Name
Set unit name
Set name to factory default
View unit name
X%
KEY:
= Unit name Consists of up to 24 alphanumeric characters, including the hyphen (-).
Information Requests
Request information
Query model name
Query model description
Query part number
Query firmware version
Example:
Query firmware version and
build
Query detailed firmware
version
X!
KEY:
= Input number
X@
= Video mute setting
X#
= Auto-input switch mode
X&
= Input and output signal status
X*
= Reclocker rate
X(
= Firmware version
ASCII Command
Response
(Host to Switcher)
(Switcher to Host)
EX%
}
CN
Ipn•
E
}
•CN
Ipn•SW4-12G-HD-SDI
E
}
X%]
CN
I
In
1I
SW4-12G-HD-SDI
In verbose modes 2 and 3:
Inf01*SW4-12G-HD-SDI
2I
12G•SDI•SWITCHER
In verbose modes 2 and 3:
Inf02*12G•SDI•SWITCHER
N
60-1683-01
In verbose modes 2 and 3:
Pno•60-1683-01
X(]
Q
In verbose modes 2 and 3:
Ver
Q
1.01
*Q
n.nn.nnnn
In verbose modes 2 and 3:
Bldn.nn.nnnn
0Q
n.nn.nnnn
In verbose modes 2 and 3:
Vern.nn.nnnn
0 through 4. 0 = no input selected.
0 = Unmute (default), 1 = mute
0 = Disabled — Manual switching (default)
1 = Enabled — The switcher selects the active input with the highest
number.
2 = Enabled — The switcher selects the active input with the lowest
number.
0 = No signal detected (default), 1 = Signal detected
0 = Automatic mode, 1 = 11.88 Gbps, 2 = 5.94 Gbps,
3 = 2.97, Gbps, 4 = 1.485 Gbps, 5 = 270 Mbps
Displayed to the second decimal place.
Additional Description
X%]
Assign name
]
Show the current switcher name
X%
X!
X@
X#
X*]
•Vmt
•Ausw
•Rte
View selected input
mute status
mode
]
]
Show the switcher model name.
]
]
Show the switcher model and
signal type.
]
Show the part number of the
switcher.
]
Show firmware version number
to the second decimal place.
X(]
]
]
Show the firmware version and
build number.
]
]
Show complete firmware version
number.
]
SW4 12G HD-SDI • SIS Configuration and Control
X%
for the switcher.
X!
, video
X@
, auto-input switch
X#
X*
, and reclocker rate
.
X(
,
13
Advertisement
Table of Contents
