Table of Contents
Advertisement
Installing Firmware with Firmware Loader
1.
Open Firmware Loader to establish a connection between the computer and the device.
The
Add Device...
Figure 39.
2.
Select
3.
Select the method of connection from the
4.
Depending on the connection method, additional options appear. Make the appropriate
selections for the current connection method.
5.
Click
Connect
6.
Click
Browse
7.
On the
and click
ATTENTION:
other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
ATTENTION : Les fichiers firmware valides doivent contenir l'extension fichier S19.
Un fichier avec n'importe quelle autre extension n'est pas une mise à jour de
firmware pour cet appareil et l'appareil pourrait arrêter de fonctionner.
8.
Click
Add
listed in the Firmware Loader main window.
9.
Click
Begin
10.
Close Firmware Loader when the
Progress
reset
dialog box opens.
Add Device... Dialog Box (Connected through USB)
from the
FOX T USW 203
Device Name
.
in the
New File Firmware (Optional)
window, navigate to the new firmware file, which has an .S19 extension,
Open
.
Open
Valid firmware files must have the file extension .S19. A file with any
. The
dialog box closes and the device and firmware are
Add Device...
to start the upload process.
column shows
, and the
100%
SIS commands on page 20 for reset information).
FOX T USW 203 Universal Switcher • Reference Information
drop-down list.
Connection Method
panel. The
field shows
Remaining Time
field shows
Status
completed
drop-down list.
window opens.
Open
, the
00.00.00
(see
Factory
41
Advertisement
Table of Contents
