Error Responses; Using The Command And Response Table - Extron electronics SW4 12G HD-SDI User Manual

Error Responses

If the switcher is unable to execute a command it receives because the command is invalid
or contains invalid parameters, the switcher returns an error response to the host. The
following error response codes can be sent:
– Invalid input channel (out of range)
E01
– Invalid input during auto-input switching
E06
– Invalid command
E10
– Invalid value (out of range)
E13

Using the Command and Response Table

The Command and Response Table for SIS
valid ASCII and hexadecimal command codes, the switcher responses to the host, and a
description of the command function or the results of executing the command.
The conversion table below is for use with the command and response table.
Space
Figure 5.
ASCII to Hex Conversion Table
ASCII to Hex Conversion Table
SW4 12G HD-SDI • SIS Configuration and Control
Commands, starting on page 12, lists
•
10