About This Manual - Omron SYSMAC C500 Installation Manual

About this Manual:

This manual describes the installation of the C500 Programmable Controller and includes the sections
described below.
Please read this manual carefully and be sure you understand the information provided before attempting
to install and operate the C500 Programmable Controller. Be sure to read the following section before
operating the C500 Programmable Controller.
Section 1 is an introduction to Programmable Controllers. General information about what a Programma-
ble Controller can do and how a Programmable Controller works is provided.
Section 2 provides a description of all the components of the C500. The names of all the individual parts
of each Unit are given.
Section 3 explains how to assemble the C500. A detailed description of how to mount each Unit is pro-
vided.
Section 4 outlines the system connections involved in installing a C500 Programmable Controller Sys-
tems.
Section 5 contains the requirements for the installation environment of the C500. Suggestions for pre-
venting electrical noise are included.
Section 6 explains the power considerations involved in installing the C500.
Section 7 lists safety considerations that should be kept in mind while installing the C500.
Appendixes , a Glossary , and an Index are also included.
WARNING
!
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
iii