Cpu; Peripheral Device Connector - Omron SYSMAC C500 Installation Manual

Description of All Components

CPU

Peripheral Device
Connector
The CPU executes the user program. The model available for the C500 PC
does not have a built-in Power Supply or Memory Pack. Choose the Power
Supply and memory pack suitable for your application. A peripheral device
connector and a memory pack compartment are provided.
SYSMAC C500
PROGRAMMABLE CONTROLLER
Indicators
Peripheral device
mounting screw
Peripheral device
connector cover
CPU mounting
screw
The CPU is equipped with one connector for peripheral devices. A peripheral
device, such as the CPU-Mounting Programming Console, can be mounted
directly to the CPU and does not require a connecting cable. To mount the
CPU-Mounting Programming Console or any other peripheral device directly
to the CPU, follow these steps:
1. Detach the cover of the peripheral device connector with a standard
screwdriver.
2. Connect the CPU-Mounting Programming Console to the peripheral de-
vice connector.
3. To ensure a positive connection, secure the Programming Console to
the CPU by tightening the mounting screws located on the surface of the
CPU.
OMRON
POWER
RUN
Memory Pack
ERR
ALARM
and Battery
OUT INMB
Compartment
Peripheral device
mounting screw
Section 2
11