MAINTENANCE ON CHASSIS AND ENGINE
Removing the rear shock absorber
9.14
–
Measure the entire spring pack when it is unloaded.
Info
Spring preload
unloaded and when it is installed.
–
Tighten the spring pack by turning the adjusting ring to the specified setting.
Guideline
Spring preload
Comfort
Standard
Sport
–
Tighten the lock ring and the adjusting ring.
Info
If you increase the spring preload, you should also slightly increase the rebound
damping.
–
Install the rear shock absorber.
400540-10
x
–
Jack up the vehicle. (
–
Remove the rear fender. (
is the difference in length between the spring pack when it is
3 mm
5 mm
5 mm
x
(
p. 66)
p. 50)
p. 125)
64