MAINTENANCE ON CHASSIS AND ENGINE
Filling coolant/bleeding the cooling system
9.84
Warning
Danger of poisoning Coolants are poisonous and a health hazard.
–
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and con-
tact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
–
Remove the radiator cap
–
Mount screw
Guideline
Screw, water pump cover
–
Mount screw
Guideline
Remaining screws, chassis
301838-10
x
–
Remove the front trim. (
–
Remove the radiator spoiler. (
. Completely drain the coolant.
with a new seal and tighten it.
with a new seal and tighten it.
p. 123)
p. 120)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
138