CONTROLS
Kill switch/emergency OFF switch with rip cord
5.6
Opening filler cap
5.7
The kill switch/emergency OFF switch
Kill switch
is used to switch off the engine under normal circumstances.
The emergency OFF switch shuts the engine off if the rider falls off the vehicle.
A rip cord is attached to clip
carabiner
.
Possible states
Clip is pulled off – The ignition circuit is interrupted, a running engine stops and a
•
non-running engine will not start.
Clip is mounted – The ignition circuit is closed and the engine can be started.
•
Clip mounted and kill switch pressed – The ignition circuit is interrupted, a running
•
301777-10
engine stops and a non-running engine will not start.
–
Press release button
301778-10
is mounted on the left in front of the fuel tank.
. It can be attached to the clothing of the rider by means of
, turn filler cap counterclockwise and lift it free.
22