MAINTENANCE ON CHASSIS AND ENGINE
Front shock absorber - adjusting the spring preload
9.9
Danger
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Make adjustments in small steps only.
–
Cross over setting
ring
.
Guideline
Cross over
301790-10
–
Tighten the spring by turning adjusting ring
Info
The left and right shock absorbers should have the same settings.
–
Tighten the adjusting ring.
–
Remove the vehicle from the work stand. (
is measured between sliding bushing
19±1.5 mm (0.75±0.059 in)
p. 50)
and the collar of adjusting
Info
Measured with no preload on the
main spring.
to setting
.
56