Cleaning; Cleaning The Vehicle - KTM 450 SX ATV Owner's Manual

CLEANING

Cleaning the vehicle

11.1
Note
Material damage Damage and destruction of components by high-pressure cleaning equipment.
–
Never clean the vehicle with high-pressure cleaning equipment or a strong water-jet. The excessive pressure can penetrate electrical
components, socket connects, throttle cables, and bearings, etc., and can damage or destroy these parts.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
If you clean the vehicle regularly, its value and appearance are maintained over a long period.
Avoid direct sunshine on the vehicle during cleaning.
Info
Do not place the vehicle onto the rear frame bracket to clean it since it could fall over.
Never raise the vehicle on your own, even if a gear is engaged.
Fuel can leak out of the fuel tank.
–
Close off the exhaust system to prevent water from entering.
–
First remove coarse dirt particles with a gentle water spray.
–
Spray very dirty areas with a normal motorcycle cleaner and then clean with a paintbrush.
Motorcycle cleaner ( p. 180)
Info
Use warm water containing normal motorcycle cleaner and a soft sponge.
156