Saves display colors.
Automatically selects the fastest sweep
time based on the current analyzer
settings for number of points, IF
bandwidth, sweep mode, averaging
condition and frequency span.
Range: 0.01 to
Sets the sweep time.
86,400 s.
Initiates a sweep and immediately releases
the HP-IB bus, allowing the analyzer
to initiate data output as soon as the
appropriate data is ready. See BASIC
programming Example 2E: lake4 - Error
Correction Processed on an External
Computer. OPC-compatible.
Selects the SWR display format.
Begins a power meter calibration sweep.
Initiates a mode in which every
measurement cycle is characterized by
sweeping in both the forward and reverse
directions and collecting raw data for
all four S-parameters. The sweeping
can occur when a SWPSTART or SING
command is received or when the analyzer
is in continuous, number of groups,
or external trigger mode. See BASIC
programming Example 2E: 'I%ke4 - Error
Correction Processed on an External
Computer.
Begins a receiver calibration sweep.
Selects the talker listener mode.
Specifies the terminal impedance of an
arbitrary impedance standard during a cal
Range:
kit modification.
Query test set. Returns a one on the
standard analyzer. This command is
compatible with the HP 8753D.
lk D
to
0