HP 8753E Programming And Command Reference Manual page 154

The 2 following commands define the format for saving files to disk.
HP-IB Programm~ 'ng and Command Reference Guide
Saves the current instrument state
in the indicated internal register.
OPC-compatible. Range: 1 to 5.
Saves to save/recall registers 01 through
3 1. SAVEREGOl through SAVEREG05
are the same as SAVE1 through SAVE5.
Range:
OPC-compatible.
Completes the TRL/LRM calibration
sequence. OPC-compatible.
Selects ASCII format for saving to disk.
Conforms to CITIFile specifications.
Selects binary format for saving to disk.
Stores the active calibration kit as the user
kit.
Sets the trace scale factor. Range:
amplitude range.
Selects a full plot, or a plot where the
graticule is expanded to the plotter's Pl
and P2.
During either a list frequency, a limit table
edit, or power loss list, deletes the current
segment.
During either a list frequency, a limit table
edit, or power loss list, closes a segment
after editing.
01 to 31.