HP 8753E Programming And Command Reference Manual page 127

Note
The commands for array input and output require the
user to set the data format for transfers in and out of
the instrument. Refer to 'Iable l-5 and the mnemonic
descriptions of FORMl, FORMB, FORM3, FORM4, and
These commands input an individual error coefficient array. Before
sending an array, issue a
the calibration type of the data. Then input the array or arrays. Lastly
store the data with ft%'~Z '
uncorrected data. Complete the process by triggering a sweep. See
Array 1.
Array 2.
Array 3.
Array 4.
Array 5.
Array 6.
Array 7.
Array 8.
Array 9.
Array 10.
Array 11.
Array 12.
Inputs a cal kit read out with
. After the transfer, the data should be
saved into the user cal kit area with
Inputs an error corrected data array, using
the current setting of the
Inputs a formatted data array, using the
current setting of the
Inputs a learn string read out by
command.
command.