HP 8753E Programming And Command Reference Manual page 104

Action
Mnemonic
MISCELLANEOUS (continued)
Wait WAIT
Active OUTPACTI
Min values OUTPAMIN'
Smoothing
coefficient
Cal kit OUTPCALK
Active
OUTPCHAN
channel
OUTPDATA
OUTPDATF
Data: point OUTPDATP
Data: range OUTPDATR
OUTPERRO
HP-IB Progrm 'ng and Command Reference Guide
s ?
Causes a self test. Returns a zero if the test
1
passes.
Makes the analyzer wait for a clean sweep
1
when used with the OPC command.
OUTPUT
Outputs value of function in active entry area
1
in ASCII format.
1 Outputs max values for all limit line segments.
Outputs min values for all limit line segments.
1
Outputs the smoothing aperture.
1
Outputs the selected error coefficient array
from the active channel. Each array is the sam
as a data array. See 'lhble 1-8, for the contents
of the arrays.
1 Outputs the active cal kit, a less than 1000 bytr
string in FORM 1.
Outputs the active channel number.
1
Outputs the error corrected data from the activl
1
channel in real/imaginary pairs. See Figure 1-4
Fast data transfer command for OUTPDATA.
1
1 Outputs trace data indexed by point. (see
Outputs trace data for range of point-s. (see
SELMINPT[ D] , SELMAXPT[D])
Outputs the oldest error in
1
error number is followed by
in ASCII format (FORM 4).
Data Point Special Functions" section in
Description
error message
1-97