These 5 commands load the file from disk with the name indicated by
the previous TITFn command. The actual file loaded depends on the file
title in the file position specified by the TITFn command. Requires pass
control mode.
HP-IB Programming and Command Reference Guide
Enables/disables the IFBW setting for a
list-frequency table in swept list mode.
Enables/disables the power setting for a
list-frequency table in swept list mode.
Selects either the stepped list mode
or the swept list mode to use with a
list-frequency table.
Activates the list values function.
The next page of values can be called
with HEXP; and the previous page can
be called with PREP; . The current
page can be plotted or printed, in
raster graphics mode, with
I tVlLL
can be printed, in ASCII text mode, with
I
. (Since these commands
may need to take control of an HP-IB
peripheral, the system controller must
have pass control capability.)
Loads the file from disk using the file
name provided by the preceding
command.
Loads the file from disk using the file
name provided by the preceding
command.
Loads the file from disk using the file
name provided by the preceding
command.
Loads the file from disk using the file
name provided by the preceding
command.
Loads the file from disk using the file
name provided by the preceding
command.
or
T I TF 1 j
I
T
T I TF3 ;
T I TF4 j
T I TF5 g
1-125