HP 8753E Programming And Command Reference Manual page 128

These commands input power meter calibration arrays into the
instrument. Values should be entered as 100 x power meter reading in
These commands input a raw data array using the current format. See
sweeping, error corrects the data, then formats and displays the data.
These commands select the instrument mode. They are all
OPC-compatible:
HP-IB I'rogramming and Command Reference Guide
Channel 1.
Channel 2.
Array 1.
Array 2.
Array 3.
Array 4.
External source, auto. OPC-compatible.
External source, manual. OPC-compatible.
Standard network analyzer.
OPC-compatible.
Tuned receiver, OPC-compatible.
Selects the internal disk as the active
storage device.
Sets the display intensity, 50 to 100
percent. Range: 50 to 100.
Selects the internal memory for
save/recall.
Done with isolation subsequence in a
Begins the isolation subsequence step in a
Selects isolation for one path, two port
calibration.
1-121