HP-IB Pro@
Sets adapter to WAVEguide.
ALC control.
Places the analyzer in the alternate inputs
measurement mode, where measurements
are made on alternate sweeps. See also
Enables the analog bus for service use.
Measures and displays the data at the
auxiliary input (ANALOG IN). Requires no
complementary information [D] when used
with ANAB<OFF>. However, when used
with ANAB<ON>: Range: 1 to 31.
Measures and displays AIR on the active
Uses all segments for list frequency sweep.
See also SSEG[D].
Asserts the sequence status bit.
Selects the amount of attenuation at PORT
1 (Option 011 with test set only). Range:
0, 10, ZO... 7OdLS
Selects the amount of attenuation at PORT
2 (Option 011 with test set only). Range:
0, 10, ZO... 7OdB
Auto scale the active channel.
Enables and disables the auxiliary
channels 3 and 4. OPC-compatible.
Sets the averaging factor on the active
channel. Range: 0 to 999.
Turns averaging ON and OFF on the active
channel.
Restarts the averaging on the active
channel.
Sets the background intensity of the
display. Range: 0 to 100.
Selects the time domain bandpass mode.