HP 8753E Programming And Command Reference Manual page 122

These commands include the indicated information when a register is
stored on disk.
HP-IB Programmi ng and Command Reference Guide
Enables the selected event-status register
bits to be summarized by bit 5 in the
status byte. An event-status register bit is
enabled when the corresponding bit in the
operand D is set. Range: 0~0~255 .
Enables the selected event-status register
B bits to be summarized by bit 2 of the
status byte. A bit is enabled in the register
when the corresponding bit in the operand
D is set. Range: O<D<255.
Outputs the value of the event-status
register.
Selects the external disk as the active
storage device.
Adds error corrected data (real and
imaginary pairs) along with the other files.
Error corrected data array only (real and
imaginary pairs).
Formatted trace data. Uses currently
selected format for data.
User graphics.
Raw data arrays (real and imaginary
pairs).
Sets the external trigger line high.
Sets the external trigger line low.
Deactivates the external trigger mode.
OPC-compatible.
Activates the external trigger mode.
OPC-compatible.
Sets the external trigger to auto trigger on
point. OPC-compatible.
1-115