Table of Contents
Advertisement
Error Messages
Error Messages in Alphabetical Order
FORMAT NOT VALID FOR MEASUREMENT
Error Number
Conversion measurements (Z or Y reflection and transmission) are not valid
75
with Smith chart and SWR formats.
FORMATTING DATA
Information
The list information is being processed for a list data output to a copy device and
Message
stored in the copy spool buffer. During this time, the analyzer's resources are
dedicated to this task (which takes less than a few seconds).
FREQ OFFSET ONLY VALID IN NETWORK ANALYZER MODE (ES Option 089 Only)
Error Number
You can only make frequency offset measurements in the network analyzer
140
mode.
FREQS CANNOT BE CHANGED, TOO MANY POINTS
Error Number
The number of points selected for setting the low pass transform frequencies is
204
too high. Reduce the number of points so that the low pass criteria is met.
FUNCTION NOT AVAILABLE
Error Number
The function you requested over HP-IB is not available on the current
202
instrument.
FUNCTION NOT VALID
Error Number
The function you requested is incompatible with the current instrument state.
14
FUNCTION NOT VALID DURING MOD SEQUENCE
Error Number
You cannot perform sequencing operations while a sequence is being modified.
131
FUNCTION NOT VALID FOR INTERNAL MEMORY
Error Number
The function you selected only works with disk files.
201
FUNCTION ONLY VALID DURING MOD SEQUENCE
Error Number
You can only use the
163
sequence. Attempting to use this softkey at any other time returns an error
message and no action is taken.
6-10
GOSUB SEQUENCE
capability when you are building a
Hide quick links:
Advertisement
Table of Contents
