Installing/Mounting; Items Supplied; F Us Clamp-On Communications Module Installation - Siemens SITRANS F US Protocol Manual

Installing/Mounting

2.1

Items Supplied

The following parts are provided when the Communications Module is purchased separately:
● SITRANS F US Clamp-on Communications Module A5E31949269
● Four captive screws
● Four captive standoffs
2.2

F US Clamp-on Communications Module Installation

Hazardous Voltage
May cause death or serious personal injury.
Disconnect power before working on this product.
NOTICE
Electrostatic Discharge, All Electronic Assemblies
Take precautions against static discharge when handling circuit boards. Semiconductor
devices must be protected from electrostatic discharge. A properly grounded conductive
wrist strap must be worn whenever a circuit board assembly is handled or touched.
Note
For proper installation, mounting, wiring, and menu configuration of the flowmeter please
refer to the Operating Instructions manual supplied with the flowmeter.
F US Clamp-on Communications Protocol Manual
Hardware Installation Manual, 11/2015, A5E34981613-AC
WARNING
2
9