Modbus, Eip, Hart & N2 Profile Mappings; Introduction - Siemens SITRANS F US Protocol Manual

Appendix A
A.1 Modbus, EIP, HART & N2 Profile Mappings
A.1.1

Introduction

To determine the flowmeter firmware version operating system part number:
1. At the meter, press the <MENU> key.
2. At [Meter Type] press the <Down Arrow> and scroll to [Meter Facilities].
3. Press the Right Arrow>.
4. Press the <Down Arrow and scroll to [System Info].
5. Press the <Right Arrow>.
6. Press the <Down Arrow> and scroll to [Op System P/N] and read your flowmeter Op
System part number.
Profile Definitions
1 = Channel 1
2 = Channel 2
3 = Channel 3
4 = Channel 4
DP = Dual Path
QP = Quad Path
①
②
③
Figure A-1
F US Clamp-on Communications Protocol Manual
Hardware Installation Manual, 11/2015, A5E34981613-AC
④
Flowmeter
⑤
Dedicated Dual
Channel
Channel 1
Profile Example
CO = Clamp-On
RF = Reflexor
1+2+3+4 = 4 Channel Sum
1+2 = Channel 1 + Channel 2
1-2 = Channel 1 - Channel 2
Clamp-on
Channel 2 Reflexor
A
67