Sega WaveRunner Owner's Manual page 46

TABLE 10 EXPLANATION OF TEST MODE
ITEMS
When the machine is installed, perform the following:
INSTALLATION
OF MACHINE 1. Check to see that each setting is as per standard setting made at
2. In the INPUT TEST mode, check such input devices as each
3. In the OUTPUT TEST mode, check such output devices as
4. In the self-test mode, check ICs on the IC Board.
MEMORY Choose the board test item in the MENU mode to allow the self-
test to be performed. In this test, PROGRAM RAMs, ROMs, and
ICs on the IC Board are checked.
PERIODIC Periodically perform the following:
SERVICING 1. Self-Test
2. Ascertain each setting.
3. In the INPUT TEST mode, test the control device.
4. In the OUTPUT TEST mode, check such output devices as
CONTROL 1. In the INPUT TEST mode, check such input devices as each
SYSTEM
2. Adjust or replace each SW and VR.
3. If the problem can not be solved yet, check the control's moves.
MONITOR In the MONITOR ADJUSTMENT mode, check to see if the
PROJECTOR adjustment is appropriately made.
1. Self-Test
IC BOARD
2. In the SOUND TEST mode, check the sound related ROMs.
DATA CHECK Check such data as game play time and histogram to adjust the
difficulty level, etc.
DESCRIPTION
the time of shipment.
SW, V.R., etc.
lamps, motors, etc.
lamps, motors, etc.
SW, V.R., etc.
37
REFERENCE
SECTIONS
SERVICE MANUAL
9-3d
9-3b
9-3c
SERVICE MANUAL
SERVICE MANUAL
SERVICE MANUAL
9-3d, e
9-3b
9-3c
SERVICE MANUAL
9-3e
11,12
SERVICE MANUAL
14
SERVICE MANUAL
SERVICE MANUAL
SERVICE MANUAL
9-3h
www.seuservice.com