Game Board; Removing The Game Board - Sega WaveRunner Owner's Manual

18. GAME BOARD

In order to prevent electric shock and short circuit hazards, be sure to turn
power off before performing work.
Be careful so as not to damage wirings. Damaged wiring can cause fire,
electric shock and short circuit hazards.
Do not expose the Game BD, etc. without a good reason. Failure to observe
this can cause electric shock hazard or malfunctioning.
To perform work safely and securely, be sure to use 2 or more workers.
The electronic parts on the IC Board could be damaged due to human body's static
electricity. Before performing IC Board related work, be sure to discharge
physically accumulated statics by touching grounded metallic surfaces, etc.
Put the Game Board in the Carton Box (an accessory) together with the Shield
Case when requesting for the replacement or repair. Transporting the Game
Board in an undesignated status for replacement/repair is unacceptable.
In this manual, how to remove the Game Board is explained for convenience.
However, this work should be performed by SEGA SERVICEMAN.

18 - 1 REMOVING THE GAME BOARD

The Game Board is installed inside the Front Cabinet.
1 Turn the main switch of the AC Unit off.
2
Push aside the Rear Cabinet
to keep a workspace.
3 Take out the 2 truss screws that
secure the Service Lid on the
upper front part of the Front
Cabinet.
TRUSS SCREW (2),black
M4 X 16
SERVICE LID
103
PHOTO 18. 1 a
www.seuservice.com