Advertisement
Main Board Settings
1. Press the test button on the Satellite to enter the main test mode.
2. Move cursor to Game test Mode. Press the test button to enter the Game Test.
3. Move the cursor to Game Assignments. Press Test Button to enter.
4. Move cursor to "Number of Satellites". Press test to change to the proper number (4-8).
Note: Do not change the "Race Mode" while setting the number of satellites.
5. Exit the menu.
6. Exit Game test menu, and then the Main System menu.
Satellite Board Settings
1. Press the test button on the Satellite to enter the main test mode.
2. Use the Service Button to move the cursor to Coin Settings. Make the settings on your new satellite
match the settings on the existing satellites currently operating. Exit back to main test menu.
3. Move cursor to Game test Mode. Press the test button to enter the Game Test.
4. Move the cursor to Game Assignments. Press Test Button to enter.
5. Move cursor to "Number of Satellites". Press test to change to the proper number (4-8).
Note: You must change ALL satellites to the same "Number of Satellites" setting.
6. Exit the menu.
7. Exit Game test menu, and then the Main System menu.
8. After all of the Satellites are set, the system MUST be reset by turning off the power to all satellites
and the main unit.
9. Turn on power to the main unit first, then turn on the power to all satellites. Verify proper operation.
Option Settings
Advertisement
