Delta Electronics PCI-M324 User Manual page 71

EzDMC Functions
6
3. Speed / position curve page
You can open the speed and position simulation screen by clicking [Simulation] >
[Drawspeed_M324] and [DrawsPos_M324] in the function menu. As shown in Figure 6.5.6 and
Figure 6.5.7, these are the simulation images for the helical motion speed and position. After you
select the [CardNo] and [Axis], click Start, and the motion image is displayed when the motion
control card starts the movement.
6-8
Figure 6.5.4 Number of times that interruption occurred
Figure 6.5.5 Speed / position curve selection function
Figure 6.5.6 Position simulation image
PCI-M324 User Guide
November, 2017