Table of Contents
Advertisement
PCI-M324 User Guide
6.2 Operate M324 functions with EzDMC
When the PCI-M324 card and connection modules (e.g. drive and motor) are set up,
please follow the procedures below to use EzDMC to test the connection:
1. Open EzDMC.
2. Find the PCI-M324 master card. (Refer to Section 6.3.)
3. Open the motion control screen.
4. Set the pulse output / input mode and I/O related settings. After making sure the settings are
correct, you can start the motion control.
6.3 Find PCI-M324 card
To find the PCI-M324 card, click Initial in the tool bar to scan the system as shown in Figure 6.3.1.
This defines the amount and configuration status of all PCI cards in the current host system.
When the search is complete, the device list displays the status of all found cards as well as the
amount and configuration of the master cards.
November, 2017
Figure 6.3.1
EzDMC Functions
6
6-3
Advertisement
Table of Contents
